INSTALLATION, REPAIR AND MAINTENANCE OF SECURITY SYSTEMS AND FIRE ALARM SYSTEMS.
INSTALLATION, REPAIR AND MAINTENANCE OF SECURITY SYSTEMS AND FIRE ALARM SYSTEMS.

INSTALLATION, REPAIR AND MAINTENANCE OF SECURITY SYSTEMS AND FIRE ALARM SYSTEMS.

Home ➤ Services ➤ INSTALLATION, REPAIR AND MAINTENANCE OF SECURITY SYSTEMS AND FIRE ALARM SYSTEMS.

Установка охранно-пожарной сигнализации: как провести монтаж правильно

Currently, security and fire alarms are very common, they increase the level of protection of all types of facilities. Due to its "multifaceted" functionality and components, Fire is not only detected in time, but also carefully monitored in the protected area. Installation and maintenance of such a device is quite complicated and expensive, but you will not find a more reliable electronic device.

Contents

1. On what principle does a fire alarm work?

2. Design and calculation features

3. Types of systems

4. Main types of sensors

5. Installation and connection of fire and security alarm systems
6. How does the alarm system work
7. Possible malfunctions after installation
8. How can you remove the fire alarm yourself.

How does a fire alarm system work?

A fire safety system is a whole "set" of various technical devices that ensure the fire safety of various types of buildings, equipment, people, as well as material assets. It includes two systems: warning people in the building and fire alarm.

OPS device diagram

Due to the hardware and software dispatcher installed, you always see the source of the fire on the site plan. If a semi-automatic mode is set in the alarm system, after receiving an alarm signal from it, the security service must turn on the fire warning system for employees and simultaneously activate visual, sound and audible notifications.

When a fire alarm is confirmed in the building, the main signal is transmitted to the ACS - "message" system, thereby switching all alarm elements to the emergency evacuation mode of employees. The signal is also sent to the control system of various utility networks of the building, after which they switch to the fire hazardous operation mode.

The fire alarm device, operating in automatic mode, performs the following functions:
Determination of the fire zone; Detection of the lesion after 2 confirmations from the moment of registration;
Monitoring of network faults for short circuits, as well as breaks in accordance with the construction plan;
Detection of the lesion at the initial stage; Control of various units with the output of the results to the dispatching workstation;

хема устройства ОПС

Designing the alarm system is the main stage on which the effective operation of the entire system depends. This work should be done by professionals, since this is a complex scheme with a number of calculations, a large number of devices and their location. However, since they are all interconnected by cables, it is necessary to design the subsequent installation trajectory. In addition, it is necessary to take into account possible nuances that are being developed in the project to eliminate emerging threats.

Multi-storey building safety design project

However, the development of an environmental protection project is a subjective process, since each object must be carefully studied, taking into account the features of use, as well as plans. In addition, it is necessary to assess:

Design complexity;
Room size;
Specific features of placement

It is also necessary to pay attention to places with a high probability of disease outbreaks. The design of a fire safety system is carried out taking into account the PUE, as well as DSTU. The project includes a wide range of different works:

Technical specifications, taking into account all the wishes of the customer;
Study of premises;
Creation of a sample project with all calculations for the work performed;
After agreeing all the nuances with the customer, all documents and estimates are signed;
Installation and testing of the alarm system.

If you need help in this area, contact SYNERGO.

For inquiries: 71 202 02 20

Our clients

1
2
3
4
5
6
8
9
10
11
12
13
14
15
16
16
17
18
19
20
21
22
23
24
26
27
28
29
30

Leave your contacts and get a free consultation

Detailed cost estimate for your project.

Image

We will be glad to cooperate with you

Contacts

Tashkent city, Shaykhantakhur district, Kukcha Darvoza street, 10